Installing video phone systems today is very widely used in addition to the function of replacing conventional doorbells. This application system also meets the purposes of safety and security control for private houses, villas and especially high-rise apartments, reducing electricity for elevators (eliminating unnecessary elevator trips.
When using the Door Call System, apartment owners can communicate and recognize outside guests by sound and image. It is also easy for outside guests to know whether the owner of the apartment is currently home or not. Through the doorbell combined with the automatic magnetic lock, the apartment owner can allow remote opening of the door for guests to enter or refuse people. strange guests without necessarily going out.
The door calling system can also be combined with other systems such as: Smart Home system, Alarm system, anti-intrusion; Access control system; Fire alarm system, etc. makes building security control easier and more effective.
Advantages of installing an apartment video phone system
- Control guests entering and exiting apartments and buildings.
- Prevent unauthorized access from the outside.
- The building management board easily controls and gives information to each apartment owner in the building.
- High stability, absolute safety.
- Easy to install and use.
- Provide diverse communication possibilities: communication between apartment owners and visitors; communication between apartment owners and security guards; communicate with neighbors; In-house communication with other sub-communications in the room; communication with building protection and centralized security modes.
- Can be integrated with Smart Home system.
- It is possible to contact the electromagnetic lock system to control the lock – open the door through the VDP touch screen.
Basic apartment video phone systems
Video bell system in the reception room: Including the main door call desk in the reception room (lobby phone), intercom (keypad) and touch screen indoor communication screen (touch screen). The intercom dial pad (keypad) includes a key to select the apartment number to allow incoming calls. The main door phone is equipped with speakerphone and built-in IP camera, allowing to transmit the image of the caller to the touch screen communication screen (iPad or iPhone ..) of the host.
Video doorbell system at the apartment door: Including doorbell with picture at the apartment door and indoor communication screen. The doorbell with a picture located at the door of the apartment allows guests to talk to the apartment owner via a touch screen device located in the living room for the apartment owner to confirm again if it is his guest, if true, the owner The apartment just needs to operate at the touch screen or go to the place to open the door to welcome guests in.
What is the role of a video phone system installer ?
Video Door Phone system today is widely used in addition to the function of replacing conventional doorbells, this application system also meets the purposes of security control and safety for private houses and villas. and especially high-rise apartments, reduce electricity for elevators (remove unnecessary stairs).
When using the Door Call System, apartment owners can communicate and recognize outside guests by sound and image. It is also easy for outside guests to know whether the owner of the apartment is currently home or not.
Through the doorbell combined with the automatic magnetic lock, the apartment owner can allow the remote door to be opened for guests to enter or deny the strange guests without necessarily going out.
Instructions for installing a technical standard apartment video phone system
Installing a screen doorbell system is not too complicated, just follow the steps in the instructions below. Users can completely self-assemble for the family, both saving costs and bringing peace of mind during use.
- Signal wire (can use network cable)
- Signal wiring jack
- Doorbell screen, bell push button
- Camera eyes
Installation steps are as follows:
Step 1: Take the signal cable
It is necessary to determine the location of the surveillance camera as well as the position of the screen, the doorbell push button. Take a jealous pipe (if you go floating) / punch a wall (if you go underground). Then proceed to wire from the place where the doorbell screen is located to the place where the camera and doorbell push button is installed.
Step 2: Install the surveillance camera and doorbell button in the correct position.
Next, wire the signal for the surveillance camera at the doorbell and doorbell screen, wire the camera and push button. Connect the 4 wires to the 4 slots in the camera and then tighten the screws. Similarly, wire the display by connecting the 4 wires to the 4 slots inside the display.
Step 3: Plug in the power to use the newly installed doorbell system
If you feel that the doorbell system has an annoying wire, another option for users is a wireless system. Installing the wireless doorbell is similar to the steps in the instructions above. This system saves the cost of buying wires as well as wiring labor, ensuring the aesthetics of the house. However, the wireless doorbell uses a wifi network connection, so it is prone to interference and the signal will sometimes flicker.
Reputable video phone system installation unit
Currently on the market there are countless units that install video phone systems. However, we would like to introduce to you a leading reputable unit in electrical installation, light electricity. That is Company P69 . P69 is always appreciated by people for the following reasons:
– Factory scale, using modern equipment. International standard.
– Professional and experienced team of engineers and technicians
– 24/7 free support consultation
– Free shipping and installation
Contact us today for a free consultation and answer at:
Contact information P69 – M&E . M&E Contractor
Address: No. 6/165C Xuan Thuy, Cau Giay District, Hanoi
Hotline: 02437688156 – 0965937799
Youtube : https://www.youtube.com/channel/UCOUwCnE5iGj8iqe_ZIUM7oA