The Cooling Pad heat exchanger membrane system is considered the “heart” of the air cooler. This is the heat exchanger, capable of converting hot air into cool air when blowing out the vent. So what is the Cooling Pad Heat Exchanger Membrane System? How does the Cooling Pad heat exchanger membrane system work? Please refer to the article below with P69 company .

What is a Cooling Pad Heat Exchanger Membrane System?

The Cooling Pad system is a heat exchanger, which can convert hot air into a stream of cool air when blowing out the vent.

Cooling Pad is considered the main part in coolers because it has the effect of transporting water as well as converting hot air into when matting, thereby lowering the air temperature. A cooling device is composed of the main parts including the cooling plate, the control circuit, the air conditioner shell, the water tank, the filter plate. Each part will perform a certain function

The cooling principle of the membrane system of the Cooling Pad heat exchanger

The cooler works based on a combination of the principle of natural water evaporation and the process of sucking hot air from the outside moving through the Cooling Pad to cool the air. The temperature inside the room will decrease by 5-10 degrees Celsius compared to the outside environment.

– The circulating water supply system pumps water through the Cooling Pad to create a thin film of water. Dry and hot air is sucked in by the fan through the Cooling Pad, where the water will be absorbed and evaporated, creating new cooler air and higher humidity.

– The exhaust gases and dust in the outdoor air pass through the cleaned filter, improving the quality.

What parts does the Cooling Pad heat exchanger system consist of?

Here are the parts to create a  complete Cooling Pad system  as follows:

1. Cooling plate

Also known as the cooling pad heat exchanger, it has the most important role in the cooling pad system and is a component of the air conditioner fan, the material used to make is cellulose paper. This paper has good water permeability and has a design that includes many grooves that can be interwoven to create a very distinctive honeycomb structure. Covered on the surface of the cooling pad are layers of water film, and when there are air flows through this water film structure, a humid heat exchange process including changes in temperature and humidity will occur. thereby allowing water vapor to enter the air and completely cool the air.

2. Water tank:

Water is a material that plays an extremely important role in the operation of the cooling pad system, and the cooler, so it is imperative that we regularly provide adequate water in the tank. The capacity of the water tank of the cooling pad system, the cooler is usually about 1000 liters to 5000 liters depending on the system using many cooling pads or not. And there is a design of clear water level measurement lines for users to easily observe, but in the process of using you remember to clean and change the water periodically.

3. The dust filter is also known as the dust filter

As an important part, whose main function is to clean the air and protect human health, just like the water tank, during use, you also remember to regularly check it to improve performance. motion for the device. The dust filter has the function of preventing dust from sticking to  the cooling pad  to help keep the cooling pad free of dirt and moss.

4.Control cabinet

As the place that controls all cooling activities, it plays an extremely important role in the system of the air cooler. The electrical cabinet controls the water pump to operate  the cooling pad system , and controls the industrial exhaust fan to regulate the air flow entering the factory and farm.

5. Industrial exhaust fan

Is a part to suck the dusty air inside the industrial factory or farm to the outside. Create air pressure difference inside the workshop and outside the workshop. Condition outside air must pass through  the cooling pad . helps change the dusty hot air inside the factory into cool air. Industrial exhaust fans are usually made of galvanized steel, stainless steel, or composite plastic with good bearing capacity, heat resistance and electrical insulation to ensure the safety of users’ health.

– In addition, there are other parts such as: wires, sensors, plumbing, pumps, PVC plastic film, Insulation ceiling aluminum tarpaulin…

What are the advantages of using the Cooling Pad heat exchanger membrane system?

Some advantages of using this  cooling pad system  are as follows:

• Using a cooling pad is superior to humidifying and reducing the temperature in the factory. Helps purify the air without toxicity, odorless by using clean water.
• The product is resistant to moss, mold, and corrosion
• Cooling plate has outstanding longevity, anti-rust. In addition, the corrugated sheets have been specially treated for outstanding durability
• High diffusion capacity, rapid cooling. A single drop of water can be diffused in ~5 seconds
• The permeability of the Cooling Pad is good. So the water will be evenly distributed along the length of the wet plate. Thereby increasing the cooling efficiency up to over 90%.

Application of the Cooling Pad

Can be used independently to ventilate large spaces such as factories….

Application of ventilation and humidification for greenhouses to grow seedlings, mushrooms, orchids…

Efficient cooling application for closed livestock farm.

As the main part in the cooler, it helps to circulate and absorb water, filter out dirt, reduce the temperature of hot air, and provide a cool and fresh breeze.

The Cooling Pad system is now being widely applied in many cooling devices on the market, thanks to the convenience and efficiency it brings. Indeed, the strong development of technology has been and will always make our lives much simpler and lighter.

Genuine Cooling Pad Price

Below is the  price list of the Cooling Pad  that  P69 Company distributes. Please refer to it

* Note:  The above Cooling Pad price  will fluctuate from time to time due to many fluctuations. However, the selling price will not differ too much. So to get  the most accurate Cooling Pad quote , please contact our hotline: 02422121212 – 0965937799.

Contact us today for a free consultation and answer at: